Concrete Resurfacing Products, Inc. has been resurfacing concrete for homeowners and businesses across metro Atlanta since 1998. If your driveway, patio, pool deck, walkway or garage floor is stained, worn, spalled or just plain ugly, we give it a new surface without tearing it out. We do not pour concrete. Everything we do goes over the slab you already have, which is why resurfacing costs a fraction of replacement.
We are a Georgia distributor and installer of Stardek decorative concrete systems, we work out of our own shop in Buford and we are rated 4.8 stars across 136 Google reviews. When people search for a concrete resurfacing company near them in Buford, Gwinnett County or the north side of Atlanta, this is who they are looking for.

What concrete resurfacing is
Concrete resurfacing is the application of a thin, polymer-modified cement surface directly over existing concrete. The slab underneath supplies the strength. The new layer supplies the look, the texture and the protection. Once it is down, the surface can be textured, stamped, colored, stained and sealed, so a plain gray driveway can end up looking like brick, flagstone, slate, tile or wood, and a dull patio can take on a rich, variegated acid-stained finish.
It is the right fix for concrete that is structurally sound but cosmetically shot: surface pitting, spalling from freeze and thaw, rust and oil stains, faded old color, a broom finish that has worn smooth and slick, or a surface that simply does not match the house anymore. It is not the right fix for a slab that is heaving, sinking or broken into moving pieces. We will tell you which one you have.
Concrete resurfacing services we offer
Every job starts with the same prep: pressure washing, grinding where needed, crack repair and a bonding primer. From there the finish depends on the surface and the look you want.
- Driveway resurfacing: textured and stamped overlays that hide wear, add traction and lift curb appeal.
- Pool deck resurfacing: cool-to-the-foot, slip-resistant spray textures and stamped overlays built for wet, sunny Georgia summers.
- Patio and porch resurfacing: stamped stone and tile patterns, knockdown textures and acid stains for outdoor living space.
- Garage floor coatings: the StarChip epoxy chip system, a tough, easy-clean floor with a decorative fleck finish.
- Concrete acid staining: reactive stains that give interior and exterior concrete a marbled, natural-stone look.
- Stamped concrete overlays: dozens of patterns and textures over existing slabs, walkways, steps and entries.
- Commercial concrete resurfacing: entries, breezeways, pool decks and showroom floors for businesses, HOAs and property managers.

Why resurface instead of replace
Tearing out and repouring a driveway means demolition, dumpsters, a week or more of no access, a new pour that has to cure for a month before it can be sealed, and a finish that is still just gray concrete when it is done. Resurfacing skips all of that. The slab stays, the mess is minimal, most jobs take a few days and you end up with a decorative surface that a plain pour cannot give you.
Resurfacing is also the greener choice. Nothing goes to the landfill and no new concrete has to be trucked in. And because the new layer is bonded to the old slab and sealed, it protects the concrete underneath from the water, salt and UV that were wearing it out in the first place.
How a resurfacing project works
- Inspect. We come out, look at the slab, check for movement and drainage problems and talk through what you want the finished surface to look like.
- Design. Pick a system, a pattern or texture and a color from our color chart. Forty standard colors, or we mix a custom one.
- Prep. Pressure washing, grinding, crack repair and primer. Prep is most of the job and it is where cheap resurfacing goes wrong.
- Install. The overlay or coating goes down, gets textured or stamped, gets its color and then gets sealed.
- Enjoy. Walk on it the next day. Reseal every few years and it keeps looking new.
Stardek systems, installed by the people who supply them
We are not a franchise running someone else’s product. We distribute Stardek materials to trained installers across Georgia and we install them ourselves. Stardek I is a spray-applied texture that stays cool and slip resistant, which is why it is the standard for pool decks. Stardek II and III are stamped and troweled overlays for stone, brick and tile looks. StarChip is the epoxy chip floor for garages and interiors. All of them have been in service for more than 35 years. See the materials page for the full line.

Where we work
Our shop is in Buford and we serve the whole north side of metro Atlanta, including Gwinnett, Forsyth, Hall, Fulton, DeKalb, Barrow, Walton and Dawson counties. See the city pages for Buford, Cumming, Alpharetta, Roswell, Lawrenceville, Johns Creek and Atlanta, or check the full list in the footer.
Questions about concrete resurfacing
How much does concrete resurfacing cost compared to replacement?
Resurfacing costs a fraction of tear-out and replacement because there is no demolition, no hauling and no new pour. The exact price depends on square footage, the condition of the slab and the finish you choose, so we price every job in person with a free written estimate rather than quoting by the foot over the phone.
How long does a resurfaced concrete surface last?
Stardek overlays and coatings have been in service on Georgia driveways, patios and pool decks for decades. With a sound slab underneath, correct prep and a resealing every few years, a resurfaced surface will outlast most people’s time in the house.
Can you resurface concrete that has cracks?
Usually, yes. Hairline and shrinkage cracks are ground out, filled and bridged before the overlay goes down. Wide, actively moving cracks or slabs that have heaved from settled soil are a different matter. We will tell you plainly when a slab is too far gone to be worth coating.
Do you pour new concrete?
No. Everything we do is applied over the slab you already have. If your concrete needs to be removed and repoured, we will say so, and you can come back to us for the decorative finish once the new slab has cured.
How long does the work take?
Most residential driveways, patios and pool decks take two to four days from prep to final sealer, depending on size and weather. You can usually walk on the surface the next day and drive on a driveway after a few days of cure.
Get a free estimate
Ready to see what your concrete could look like? Call (770) 614-5444 or request a free written estimate. We come to you, look at the slab and price the job on the spot. Concrete Resurfacing Products, Inc., 2410 Satellite Blvd NE, Suite G, Buford, GA 30518.